Plant 3D Piping Design
Resume:
R.Ardhanarieswaran
Seelanaickenpatty,
Salem 636 201
Mobile No: 620-***-****
Email id : *************@*****.***
Career Objective
A Piping Designer with more than 10 years of experience in Design & Engineering in Mechanical and Process Engineering, major projects pertaining to Oil & Gas, Refineries and Petrochemicals. Design of cost effective Piping system with latest technical advances based on International Standard.
Design & Detail engineering of piping systems in AutoCAD. Activities included are preparation and checking of Plant Layout, Piping Specification, Equipment layouts, Piping general arrangement drawings, Piping Isometric drawings, Composite System drawings, Pipe Supports, Material selection, MTO, Requisitions etc. Checking of produced Drawings with P & ID, Codes and Standards.
Educational Qualification
B.E/ Mechanical Engineering
Name of Institution : K.S.Rangasamy College of Technology
University : Anna University of Technology, Chennai
Year of Passing : May, 2012
CGPA : 8.52
Higher Secondary School
Name of School : Vedhha Vikkas Higher Secondary School
Board : State Board
Year of Passing : March, 2008
Percentage : 85.42%
Secondary School
Name of School : Government Higher Secondary School
Board : State Board
Year of Passing : April, 2006
Percentage : 88%
Areas of Interest
Oil and Gas Engineering
Design Engineering
Power Plant Engineering
Software proficiency
Auto Cad Plant-3D 19, 20 & 21
Plant Design Management System
Navisworks
Revit 2021
Any customized software
Magnasoft Consulting India Pvt. Ltd. Jul 2020 to Jul 2023
Project : Kaneka
My Responsibilities:
The pipes are modeled as per point cloud and P&ID with pipeline tag, service, slope, insulation & etc.
The pipes are modeled by elimination of sagging that will be helpful for future piping.
The tag is provided for valves, instruments, equipment and matched with point cloud
The instruments are customized as per the size and model.
The tag format for modified as per the client requirement.
Checking the piping model along with X-ref.
Good proficiency in using review tools like Navis works and produce and ensure quality and consistency of common piping deliverable including; Isometrics, Piping GA's, Tie-In Details and Plot Plans.
Responsible skills to control the flow of a job like assigning task, scheduling of deliveries and coordination with clients.
Act as bridge between client and Engineering Manager, between the team and Management.
To have good communication skills like email-writing to help sharing data among the team from client and vice-versa.
Project : ICC
My Responsibilities:
Modeling of Equipment in AutoCAD Plant3D as per preliminary Information & arranging them as per equipment layout & Plot plan.
Good expertise on Piping Design of different systems like Pump, Heat Exchangers, Column, Air-fin Cooler, Tank farm, hot oil systems and other utilities like Steam and Gas lines.
The piping is modeled as per point cloud and updated the routing as per the client requirement.
The pipe and valves are customized with spec editor.
The special components are modeled as custom part.
The support is placed as per the reference marking.
The ortho model generated for the piping with structure.
The annotations are provided for pipeline tag, valves & elevations of model are placed.
The management of weekly deliverables on time with quality
Tata Technologies Limited Jharkhand (On Contract) Apr 2018 to May 2020
Project : Coke Oven Battery
Client : TTL (Tata Technologies Ltd Kalinga Nagar)
My Responsibilities:
Good expertise on Piping Design and Knowledge on Pipe Spooling, fabrication and construction practices.
Responsible for economical Piping Routing with respect to isometric input and modeling with necessary insulation, slope, components and valves selection.
Preparing of BOM, Line list, Insulation list, Paint list, Valve list Line list and support list for the specified region of piping.
Responsible to prepare the indicators and special purpose items list.
Selecting the type of support for the piping as per PMS, modeling and placing the support as per requirement.
Produce and ensure quality and consistency of common piping deliverable including; Isometrics, Piping GA's, Tie-In Details and Plot Plans.
Project : Over Head Yard Piping
Client : TTL (Tata Technologies Ltd Kalinga Nagar)
My Responsibilities:
Piping routed for COG, BFG, N2, Steam and Water services on the pipe rack.
Assigning the color and spec as per PMS in project setup.
Responsible to maintain the slope, insulation, valves and expansion loops.
Modeling of drip leg, knockout drum and drain lines.
Selection, modeling and Placement of support as per support standards.
Checking with the other area by using X-ref.
Coordinate with other disciplines for project related queries & preparing weekly progress report.
Updating the received comments from clients.
Generation of ortho as detailed output for submission to client.
Jacobs Engineering Mumbai (On Contract) Feb 2016 to Mar 2018
Project : Indriya IFF Greenfield Project
Client : IFF (International Flavours & Fragrances India Pvt Ltd Chennai)
My Responsibilities:
Modeling of Equipments in AutoCAD Plant3D as per preliminary Information & arranging them as per equipment layout & Plot plan.
Modeling of operating platforms, equipment platforms, ladder, handrail, staircases etc. from structure module in AutoCAD Plant3D.
AutoCAD Plant3D Modelling of Access Ways / Escape Route / Future Space in envelop.
Responsible for economical Piping Routing with respect to P&ID in AutoCAD Plant3D and study piping including necessary line slopes, insulation, instrumentation, valve and special purpose items.
Done various types of piping in AutoCAD Plant3D such as Process piping, Rack Piping, Utility piping & Vessel Trims Etc.
Placing utility station in the plant.
Support modeling of various lines in piping by using pipe support standard.
Preparation of 2D Plot plan on AutoCAD along with X-ref.
Preparation of Nozzle orientation drawings & checking the vendor drawings with model.
Extraction of MTO from P&ID.
P&ID mark-up according to pipe routing & giving information for process department for P&ID updating.
Co-ordinating with Supervisor to Achieve Weekly Target for Isometric Production.
Checking Of Isometrics as per P&ID.
Attended the client review & resolving the related tags & maintaining the data for the same.
Coordinate with other disciplines for project related queries & preparing weekly progress report.
Project : Nenoje Formic Acid Plant
Client : Bopak-Sijo Collabration Indonesia
My Responsibilities:
Responsible for preparation of Plot plan Equipment Layouts, Piping Layouts for tank farm area, Data sheet for storage tanks, tank BOM and Nozzle orientation
Preparing IFC Isometric drawing and checking with P&ID and Equipment Data sheets.
Perform the three-dimensional Design using AutoCAD Plant 3D.
Piping review using Navisworks
The 3D model integrates basic design information of Disciplines, such Equipment, Piping, and Structures.
Knowledge in process equipment and P&ID symbols.
SGK Techno Enclave Hyderabad (On Contract) Aug 2014 to Jan 2016
Project : Vietsovpetro Vapour Recovery
Client : Petro Process System PTE limited
My Responsibilities:
Modeling of Equipment in Plant 3D.
Responsible in preparing Design Change Request.
Responsible for economical Piping Routing with respect to P&ID in Plant 3D.
Preparation of Nozzle Orientation Drawing for all Equipments.
Preparation of Foundation Drawing for all consoles.
Clash Checking Of Piping system with other facilities
Preparing final Bill of material for entire Console.
Preparation of Piping Plan for all Console using Plant 3D
Preparation of Fabrication drawing.
Project : Santopy Expansion Unit
Client : Febreo Engineering Nigeria
My Responsibilities:
Modeling of Equipment in Plant 3D as per the Vendor Data, Vendor Package Drawing & SKID drawings.
Fixing the Tie in points for the area and skid piping.
Preparation of Nozzle Orientation Drawings for Vertical columns.
Preparation of Piping Layout for Utility service, Process lines, Fire Fighting System.
Checking of Equipment Layout as per the vendor Information Available.
Checking Of Isometrics as per P&ID.
VA-Tech Webach Engineering Chennai Feb 2013 to July 2014
Project : WRR Expansion Phase II & III Project
Client : Ennpi Egypt
My Responsibilities:
Designing of Air Cooler Piping, Expansion Drum piping in PDMS
Designing of Water Injection System involving Tank piping & Pump piping in PDMS
Modeling of equipment in PDMS like pumps, filters, exchangers and arranging them as per equipment layout
Checking of lines for data consistency and clashes in PDMS and preparation of clash reports
Extraction and preparation of general arrangement drawings using Draft.
Checking of ISO’s and preparation of BOM
Participating of internal review & external review and updating the comments
Coordinating with Interdisciplinary & Interdisciplinary coordinates for project related queries.
Contact this candidate