Waqas Mansha
Nationality: Pakistan
Contact
Phone Oman: 009**-********
Phone Pakistan: +92-033********
E-mail:*************@*****.***
Profile
Objective
To manage people, interface with customers and work with highly
Technical software or hardware applications. Improve my skills and
Experiences to be an effective person in my work team.
Education
BS : Computer Systems Engineer (2008-2012) MUST Mirpur AJK
Intermediate: Muhamdan Science college Hajira AJK
CCNA Training: Corvit Islamabad.
Work Experience
Jan 2018—Present at Huawei-OOREDOO Project
2G-3G RF Engineer
Maintaining Capacity, accessibility, Integrity and retainability by monitoring and analyzing KPIs regularly such as RRC access success rate, RAB success rate, drop for PS and Low throughput cells
CR creation for NewTK (rollout sites).
Script preparation for NEWTK (rollout sites) & execution.
Auditing Neighbors and adding neighbors for all layers.
Suggesting the physical optimization and parameter changes to improve coverage, quality and capacity.
Decrease SHO overhead
KPI monitoring for NEWTK, Expansion sites, L2100, L900 activation.
KPIs analysis such as CSSR, RAB-RRC setup, call drop, pilot pollution,Ec/No, handover & handoff problems (Softer, Soft, Hard, IRAT), SHO overhead, power control
Spectrum clearance for L900 and L2100 activation.
3G TCP utilization study for power reduction.
Route preparation and route approval for CAC monitoring from customer.
CAC reports Preparation to check the impact of NewTK site and optimization of area in case of any discrepancies.(coverage gap, pilot pollution, overshooting,RTWP)
Huawei Antenna MOD(PB—OB) MBB277 sites project Coverage and KPI analysis and approval.
4G RF Engineer
Activation of New and expansion (carrier addition) sites for functionality and coverage testing.
Conducting SFT of Rollout sites.
L2100, L800, L900. L1800, L2600 SSV submission and KPI approval
4T4R activation and KPI monitoring for activated sites.
Suggesting the physical optimization and parameter changes to improve coverage, quality and capacity.
Redirection & PS HO CSFB
FLASH & Adaptive CSFB.
Troubleshooting & Optimization for LTE worst cells.
Feb 2017—Jan2018 at LCC Muscat –Huawei OOREDOO Project
Post Processor (2G,3G,LTE(FDD-TDD))
Analysis of drive test data and troubleshooting for GSM, WCDMA LTE FDD Network.
Support the DT team and coordinate with them to resolve issues.
Analyze Layer 3 messages and analyze LOGS
Making SSV’s and Cluster drives reports.
Making reports with Actix analyzer, MapInfo,GENEX Cloud, GENEX Assistant
Uploading daily Activities on cloud. (Project creation, assigning, Task downloading and analyzing logs).
Sector swaps identification and removal.
SSV, Clusters, BSC RNC RAN upgradation reporting to Customer, meeting required targets..
Troubleshooting problems in DT including RSRP, SINR, Swap, PCI conflict, Handovers, TCH-Drop missing neighbors..
Customer Complaint handling.
Dec 2014 – Jan- 2017 at LCC Pakistan
RF Drive Test Engineer (2G 3G 4G)
Working as RF Drive Test Engineer ZTE-Huawei-ALU (ZONG-Ufone-Warid 2G 3G 4G Rollout & expansion)
Drive Test for Pre-launch and Post Launch Optimization 2G Sites using TEMS.
Swap testing and find out Sector swap, Partial Swap, Inter-cell and Intra-cell Handovers, TRX, EDGE/GPRS, DTX, Rx signal strength and Quality related issues
Pre & Post Drive test before and after swap of HUAWEI U900..
Resolving the Handover issues, Sector swapping, Rx Quality, Overshooting and Interference issues.
CS & PS Testing for U-900 swap sites
Post Cluster Drive after U-900 HUAWEI swap for optimization and final Post Cluster Drive after optimization.
Performing SSV (Single Site Verification) & Cluster drive for PS & CS for optimization purpose using TEMS v15.2, v15.3.2 &16.1.
Drive test/Walk test to determine PS, CS, softer/soft handover, cell Reselection and IRAT issues and resolved it on field
. Identifying different network problems like drop call; block call, missing neighbor, missing intra frequency, softer handover failure, soft handover failure and hard handover failure
. Drive test for on air sites for diagnosing quality and Interference issues.
Testing HSDPA, HSUPA, R99, its uploading downloading and also Ping.
Performing Cluster drive to meet KPI targets and for optimization.
Scanning of WCDMA band using TEMS.
Primary verification of drive test find out sector swap & add DN (Detective Neighbor).
Find out Pilot Pollution. • SSV and Pre/Post Cluster reporting.
3G Network scanning using PCTEL scanner.
Mar 2013 – Nov- 2014 KCN Telecom (PTCL-ALCATEL LUCENT 7302 ISAM Project)
Fixed Line Engineer
Survey of Sites for Installation of ALU ISAM 7302
Installation, Integration and Commissioning of ALU ISAM 7302.
ISAM Configuration for broadband services like HSI, IPTV and VOD
Responsible for configuration and Troubleshooting of Voice Services NGN (PSTN, ISDN
Responsible for PAT with Customer.
IOT of ALU MSAG with multi-vendors (ZTE and Huawei) for all the services (voice, E1, SHDSL)
Holding on call responsibility to offer 24/7 support
XDSL and SHDSL configuration in different setup scenario
Installation and commissioning of ALU switch 7210 and ALU router 7705.
Optical Fiber connectivity
Fiber Troubleshooting
Testing Triple Play Services
Pre PAT of 7302 ISAM MSAG
Removal of Deficiencies
Main points
Ability to think strategically
Ability to deliver to challenging targets and deadlines
Good knowledge of 2G, 3G and 4G network architecture
Good knowledge of Radio network functionality
Experience of network optimization techniques and processes
Experience of using network statistics, networks traces and drive test logs to analyze and improve network performance
Strong database and tool knowledge to include MapInfo, Actix analyzer, Huawei GENEX cloud, Huawei GENEX Assistant/Probe. TEMS Investigation.
Other Skills
I have the ability to learn & research in any topics needed.
Solid technical and engineering knowledge.
Ability to work with technical Teams to meet challenging goals.
Ability to work under pressure to deliver results within set deadlines
I have the creativity and flexibility.
Languages
English &Urdu (native)