Engineer Sales

Sidney Smith Oteggewo Osojoh Ebot

**** ****** *** *****

Columbus, OH 43229

Phone: 614-***-**** Email: *********@*****.***

Skype ID:*********@*****.*** Linkedin: https://www.linkedin.com/in/sidneysmithebot/ OBJECTIVES:

Demonstrate my work and education experiences in order to get an Electrical or Electronic Engineering job (systems design, integration, installation to testing) that enable me to use my acquired skills to be exceptionally productive.

SUMMARY:

An innovative, Problem solving and result-oriented Electrical and Electronics Engineer with over five years of Electrical and Electronic engineering experience. Excellent interpersonal and communication abilities and possess a wide range of technical skills. Enjoys being part of a team and thrives in high pressure and challenging working environments. Broad knowledge of Circuit Analysis, Design and Testing. Interested in an Electrical or Electronic Engineer position. COLLEGE EDUCATION:

Fontys University of Applied Sciences, Eindhoven, Netherlands. Major: Electrical and Electronic Engineering.

Degree Earned: Bachelor of Science in Ectrical and Electronic Engineering (BSEE) with CGPA of 3.0. PROFESSIONAL MEMBERSHIP:

Member of Institute of Electrical and Electronics Engineers (IEEE). SKILLS:

Applications: NI LabView, NI Multisim, MATLAB and Simulink, ABEL Hardware Design Language, Microchip MPLAB, VHDL using Xilinx ISE, HDL Designer and ModelSim, LTSpice, ST Visual Develop, Cosmic C Compiler, Visual Studio, Atmel Studio, Eagle, Altium Designer.

Programming Languages: C/C++, Java, C#, Basics of PLC Programming using Ladder Diagram.

Operating Systems: Windows XP, Vista, Windows 7, Windows 8, Windows 10.

Microsoft Office Suite: Words, Visio, Power Point, Excel, Publisher and Access

Circuit Design, Analysis and Testing, Instrumentation and Electrical Measurements, Organizational Skills, Interpersonal Communication, Problem Solving, Testing and Validation of Electrical Systems, Embedded Software Development, Prototyping.

LANGUAGES:

Bilingual (French-Basic and English-Fluent)

WORK EXPERIENCE:

1. State of Ohio, Department of Health March 2020 to Present Job Title: Electronic Technician

Task: To Install, service, diagnose, calibrate, repair and perform preventative maintenance on Multi-Agency Radio Communication System [MARCS] mobile and two-way radio systems in support of the Bureau of Health Preparedness (BHP).

MARCS is dedicated to providing Ohio's first responders and public safety providers with state-of- the-art wireless digital communications, and to promote interoperability, in order to save lives and maximize effectiveness in both normal operations and emergency situations. Achievements:

Coordinates, conducts and tracks periodic tests on MARCS mobile equipment with external partners (e.g., local health department [LHD] staff, health care professionals, hospital administrators, internal ODH staff).

Designs, writes, and updates MARCS, Ohio Public Health Communications System (OPHCS), Ohio Point of Dispensing (OPOD), Surgenet, Ohio Responds, OhioTRAIN and all technically operated systems.

Works closely with LHDs to identify issues and concerns, in order to ensure integration of communication (mass notification via voice or email) systems as they relate to technical procedural use of equipment and continuity of program goals regarding OPOD, MARCS and OPHCS.

Interacts closely with program managers to ensure coordination of information (e.g., continued updates) as needed for assigned projects as they relate to public health preparedness and communication infrastructure.

2. Varsity Tutors, U.S.A. November 2019 to Present Job Title: Tutor

Task: To teach and help middle school to University students with their assignments and projects in Mathematics and Electrical Engineering.

Achievements:

I actively taught students

I created lesson plans

I assigned and corrected homework

3. Nkelecom Consulting, Eindhoven, Netherlands March 2014 to March 2019 Job Title: R&D Electronic Engineer

Task: To find out solutions to problems presented by clients. Design, build and improve technical solution on manufacturing process to achieve efficient and sustainable performance for clients. Achievements:

I researched, designed and developed new electronics systems and additional modules to existing systems in compliance with customer specifications from concept development to production launch.

I performed circuit simulations using LTSpice, Multisim, MATLAB and Simulink.

I designed and modified electronic systems and modules using Eagle and Altium Designer for schematic capture and PCB layout.

I developed prototypes and test circuit designs in an electronic lab environment.

I carried out hardware performance evaluation tests and data analysis.

I Investigated complaints from customers, evaluated problems, and recommended solutions

I developed maintenance and testing procedures for electronic systems and modules

I performed project planning and estimating tasks during product development.

I performed testing of Electronic modules and Systems to conform functional specifications and requirements.

I also developed Embedded Software systems using Microcontrollers such as Arduino Microcontrollers, PIC Microcontrollers, STMicroelectronics Microcontrollers, ATMEL Microcontrollers.

I developed and maintained engineering documentation and test procedures. 4. ASML Netherlands B.V., Netherlands November 2015 to May 2016 Job Title: R&D Electrical Engineer

Project Title: Model Driven Engineering with MATLAB. Case Study: Refactoring of MATES Tasks: MATES, which stands for MATLAB Exporter to Software Development is a MATLAB tool that helps functional engineers to validate the possible problems while deploying MATLAB models developed in Windows operating system in the deployment platform that operates on Solaris or Linux.

Achievements:

I redesigned the MATES tool using refactoring to introduce software principles, give proper naming of the MATLAB m-functions

I introduced a proper-layered architecture in MATES.

I designed a test to compare the output of the exiting MATES and the redesigned MATES

I documented the MATES to provide a guide for easy maintenance

I presented the outcome of the project to a team of engineers

I used Microsoft Word, Visio, Excel and PowerPoint in this project. 5. Philips Innovation Services, Netherlands January 2015 to June 2015 Job Title: Electronic Engineer

Project Title: Power Over Ethernet using POECIE Board Tasks: Philips has developed luminous carpets which consist of placing carpets over a Luminous Carpets (LC) LED tile made up of 16x16 matrix of Luxeon 3014 LEDs. The Poecie system is self- powered if connected to a PoE switch.

The Poecie system was developed by Philips Innovation Services for Digital Power Lighting projects with the ambitions in the field of Power over Ethernet and IP control for lighting. It functions as an injector. It gets data from the switch and injects the data and 0.5A at a voltage of 48V DC to a Power Device (PD).

Achievements:

I investigated the possibility of using Power over Ethernet to power an existing Luminous Carpet LED (LC) tile and to establish a communication protocol between the Poecie board and the LC tile using serial peripheral interface (SPI) to control the LEDs on the tile.

I designed and implemented a firmware for the communication protocol using the programming in C++ with an ATMEL microcontroller.

I designed a DC-DC converter to stepdown the voltage to 3.3V DC to power the Microcontroller.

I carried out testing of electronic systems using equipment like Oscilloscope, Digital Multimeter, and Logic Analyzer.

6. Fontys University of Applied Sciences, Netherlands September 2014 to January 2015 Job Title: Academic Tutor

Tasks: Assistant to the lecturer of Control Theory. Assisting second year engineering students to do their practical assignments in control Theory.

Achievements:

I provided explanations and possible solutions where students found difficulties

I explained to them how to solve problems and checked the completed work

I helped students with MATLAB commands

I revised the calculation of transfer functions of Electrical circuits and Mechanical Systems with the students

I taught the students how to simulate transfer functions using MATLAB and Simulink

I taught the students how to construct and visualize Root Locus and Bode plots on MATLAB

I gave some feedback to the lecturer for improvement of some of the assignments

I also made proposals for correction of some of the assignments where I found errors

I also taught and provided the lecturer and students with codes on how to calculate the natural frequency, damping ratio and overshoot of second order transfer functions using MATLAB.

I taught the students how to use MATLAB’s Sisotool and the effect of different controllers 7. Philips Lighting, Eindhoven, Netherlands September 2013 to January 2014 Job Title: Electronic Design Engineer

Project Title: Controlling Xitanium 75W Analogue LED driver digitally using DALI Protocol Tasks: Xitanium 7W Analogue LED driver is a non-dimmable driver with fixed output current set by Rset, controlling it digitally with DALI will make it possible to vary the output current thus the brightness of the LEDs.

Achievements:

I carried out testing to locate suitable point on the Schematic of the LED driver by testing, where a PWM signal can be injected

I selected a suitable low-cost microcontroller, which I used to generate PWM signal using C language

I designed and implemented the firmware for generating the PWM signal.

I integrated the PWM Module into the DALI protocol for controlling the output of the LED driver.

I carried out testing using equipment such as Oscilloscope, Digital Multimeter, Function Generator.

I designed a DC-DC converter to stepdown the voltage to 3.3V DC to power the Microcontroller.

I designed a Low pass filter and Voltage level shifter and integrated it into the existing LED driver.

I assisted the Testing team to carry out some Hardware in Loop (HIL) testing on LED drivers using LabView.

I documented and presented my investigation and the outcome of the project as a report. 8. Best Sales Electronics, Buea, Cameroon July 2004 to August 2011 Job Title: Director of Sales and Maintenance

Task: Managing the sales and technical teams of Best Sales Electronics. Best Sales Electronics is a shop that sells and repairs Electronics/Electrical equipment and appliances. Achievements:

I cut down the running cost by scheduling labor as required to ensure that all positions were staffed as needed and labor cost objectives were met.

I developed and managed the marketing budget to achieve maximum sales and profit

I oversaw all event bookings to ensure that the sales were filled with qualified leads and prospects.

I hired, train, and evaluate all sales staff under the direction of upper management

I assisted as needed to ensure guest service standards and efficient operations are effective

I prepared all required paperwork in an organized and timely manner

I analyzed sales data, compiled reports, and made suggestions based on analysis.

I helped clients to interpret user manuals of equipment and appliances.

I helped to educate the clients on how the electronics equipment and appliances are used

I helped to troubleshoot problems encountered by clients with the appliances 9. Standard Comprehensive Bilingual High School, Cameroon September 1996 to June 2004 Job Title: High School Science Teacher

Task: To prepare secondary and high School students for their final examinations in Mathematics and Physics.

Achievements:

I actively taught students

I created lesson plans

I assigned and corrected homework

I managed students in the classroom

I communicated with parents about the progress of the students REFERENCES:

Provided upon Request

Contact this candidate