Safety Engineering
Resume:
Jonathan A. Bull
*** ***** **** **** **. Apt # *
Boca Raton, FL 33431
Dear Sir or Madam,
In the interest of applying for Systems Safety Engineering position within
your organization (Job ID# 7035), I am enclosing my resume for your
consideration and review. As an extraordinarily organized, articulate, and
detail-oriented individual with eagerness to expand my horizons and meet
new challenges, I am confident my qualifications match your requirements.
I would bring to the position a Master of Science Degree in Occupational
Safety, Security, & Emergency Management and more than three years of
related experience, a strong work ethic, developed skills, and a commitment
to excellence. I have enhanced and refined my talents, and I would welcome
the opportunity to showcase them for you.
My experience in evaluating design specifications on over a dozen
Department of Defense (DoD) programs and incorporating Safety Engineering
requirements into hardware and software used in military aviation and land
based equipment has proven to be an invaluable asset. Additionally, I am
skilled in R&M Analysis, Preliminary Hazard Analysis, System/Subsystem
Hazard Analysis, and Operating and Support Hazard Analysis using Fault Tree
Analysis techniques, OSHA/ EPA regulations, Department of Defense (DoD)
directives, and Military safety standards (MIL-STD).
Overview of Engineering Job Duties:
. Reviewing program Statement of Work (SOW)/contract design
specifications and providing safety engineering guidance to program
design engineers and installation teams in accordance with MIL-STD-
882D.
. Conducting Hazard Analysis to identifying risk factors associated with
Electrical, Mechanical, Radiological, Chemical, Environmental, and
Ergonomic design.
. Developing principles and practices that mitigate identified risk
factors by integrating Safety Engineering principals into the design
of systems and equipment.
. Preparing multimedia presentations and personally addressing customer
concerns during SSR, PDR, CDR, and TRR milestone reviews.
. Conducting pre-manufacturing design reviews of system drawings to
verify conformance with design specifications.
. Developing safety procedures for Operation and Maintenance (O&M)
manuals and detailing human interface guidelines for the use of Repair
Parts and Special Tools Lists (RPSTL).
. Preparing Test Procedures and producing a summary Safety Assessment
Report (SAR).
Additionally, I am experienced in developing and managing facility-wide
Environmental Health and Safety (EH&S) programs that ensure corporate
compliance and employee safety with OSHA, EPA, DOT, state, and local
requirements. This includes, in conducting EH&S audits to identify areas of
potential liability and implementing customized site specific Safety,
Ergonomic, Environmental, Emergency Action, & Disaster Preparedness
compliance programs that meet all Federal, state, local and regulations.
All of which will allow me to immediately become a very productive member
of your staff.
I take great pride in my work and receive immense satisfaction from knowing
that through my actions I have satisfied the diverse needs of my clientele,
while helping my staff members and colleagues become more productive and
efficient. I would like to do the same for your organization.
The enclosed resume summarizes my background and experience. Please feel
free to contact me at 813-***-**** at your earliest
convenience, so I can give you a more in-depth review of my qualifications.
Thank you for your time and consideration. I look forward to your
response.
Respectfully,
Jonathan A. Bull
Enc. Resume
Jonathan A. Bull
521 N.E. 43 St. Apt # 8 Boca Raton, FL 33431 C: 813-***-****
abjzwx@r.postjobfree.com
Systems Safety Engineer
SR. SYSTEMS SAFETY ENGINEER POSSESSING A SOLID BACKGROUND IN MEETING
DEPARTMENT OF DEFENSE (DOD) SYSTEMS SAFETY ENGINEERING REQUIREMENTS IS
SEEKING A PROFESSIONAL OPPORTUNITY WITHIN THE CORPORATE SETTING.
CONSCIENTIOUS AND RELIABLE WITH PROVEN EXPERIENCE IN MEETING SYSTEMS SAFETY
ENGINEERING REQUIREMENTS OF MIL-STD-882D ON MULTIPLE PROGRAMS. HAVE
WORKED IN VARIOUS PHASES OF MANAGEMENT, ENGINEERING, DESIGN, AND
MANUFACTURING AS IT RELATES INTEGRATING SAFETY SYSTEMS PRINCIPALS INTO
MILITARY AVIATION AND LAND BASED EQUIPMENT REQUIRED TO MEET DEPARTMENT OF
DEFENSE (DOD) AND OSHA SAFETY REQUIREMENTS. EXCELLENT COMMUNICATION SKILLS
DEMONSTRATED WITH MANAGEMENT, ENGINEERING, AND OPERATIONAL STAFF AS IT
APPLIES TO ACHIEVING DESIRED BUSINESS RESULTS. DEMONSTRATED LEADERSHIP
ABILITIES IN ESTABLISHING A PRODUCTIVE WORK ENVIRONMENT WITHIN DIVERSIFIED
GROUPS. (COMPLETE LIST ON REQUEST). SYSTEMS SAFETY ENGINEERING SKILLS
INCLUDE:
Meeting Standard Practice for System Documenting the System Safety Program
Safety in accordance with MIL-STD-882D Plan in accordance with DI-SAFT-80100
Reviewing Safety and Engineering Change
Applying Human Factors Engineering Proposals in accordance with
(HFE) in accordance with MIL-STD-1472F DI-SAFT-80103
Producing Safety Assessment Reports
Meeting Military Standard, Design (SAR) in accordance with DI-SAFT-80102
Criteria Standard, Noise Limits in Meeting System Safety Engineering for:
MIL-STD-1474D Army 385 Safety Series
Performing program and design reviews Air Force AFSCP 127-1
in accordance with MIL-STD-1521 Navy OPNAVINST 5100.24B
Conducting System Safety Reviews in Defense Acquisition DoD 5000.2-R
accordance with DI-SAFT-80105
Producing a System Safety Hazard
Analysis Report in accordance with
DI-SAFT-80101
Education & Training
EASTERN KENTUCKY UNIVERSITY, RICHMOND, KY 12/2008
Master of Science in Safety, Security, & Emergency
Management
Concentration: Occupational Safety
UNIVERSITY OF SOUTH FLORIDA, Tampa, FL
05/2007
Bachelor of Arts in Interdisciplinary Social Sciences
EXPERIENCE
U.S. FOODSERVICE SOUTH FLORIDA DIVISION, BOCA RATON, FL 3/2010 - Laid-Off
09/2010
Division Safety Specialist
Developed and managed site safety and facility-wide Environmental Health
and Safety (EH&S) compliance programs for a major south Florida
distribution center with over 350 employees that ensured corporate
compliance and employee safety with all OSHA, EPA and DOT requirements.
Performed job hazard safety assessments and environmental impact analysis.
Conducted investigations to determine the root-cause of all accidents/
injuries. Convened weekly Accident Review Board (ARB) meetings and
chartered a joint employee/management Safety Committee dedicated to
measurably reducing work place accidents by proactively addressing
potentially hazardous operations and equipment. Produce monthly reports of
performance metrics, conducted employee training, and worked daily with
front line supervisors and managers to develop a proactive safety culture.
Additional responsibilities included overseeing site security,
coordinating DOT post accident drug & alcohol screenings, and managing all
Workers' Compensation, Auto, and Product Liability claims.
Key accomplishments:
. Scheduled and conducted facility wide EH&S audits and produced summary
management reports of findings and recommendations for the control and
correction of hazards.
. Constructed, implemented, and monitored comprehensive facility-wide
environmental and industrial hygiene compliance programs which utilized
administrative & engineering control measures to achieve maximum safety,
environmental compliance, and employee protection.
. Developed, planned, and implemented employee occupational safety and
environmental health pre-shift meetings and training programs that
measurably reduced recordable accidents, injuries, and incidents.
. Maintained all record keeping and reporting requirements for the OSHA 300
Log.
. Constructed, implemented, and monitored comprehensive hazardous
materials/pollution prevention programs that meet OSHA, EPA, and DOT
requirements for reporting, identifying, storing, transporting, and
documenting the disposition of hazardous materials.
. Arranged for testing, evaluation, and measurement of hazardous working
place conditions and scheduled medical evaluations for employees whose
duties had exposed them to hazardous conditions.
. Determined the appropriate job specific Personal Protective Equipment
(PPE) needed to ensure the safety of employees, contractors, and
visitors.
. Maintained compliance with all internal and external recordkeeping and
reporting requirements.
. Verified that all subcontractors and vendors have documented employee
training and submitted an up-to-date written site-specific health and
safety program that meets all regulatory requirements.
. Reduced Workers Comp, Auto, and Products liability claims by conducting
investigations and identifying solutions that mitigated the root cause of
accidents, injuries, and near misses that occurred on site.
. Maintained compliance with OSHA Process Safety Management (PSM), SARA
Title III -- Tier II, Toxic Release Inventory (TRI), Resource
Conservation and Recovery Act (RCRA), Title V of the Clean Air Act and
Spill Prevention Countermeasures and Control (SPCC) plans.
. Coordinated with regulatory agencies and local Emergency First Responders
to minimize the impact from an accidental spill/release of hazardous
materials, or, a natural/manmade disaster.
DEI SERVICES CORP., Winter Park, FL 01/2009 - 01/2010
Sr. Systems Safety Engineer
Ensured that the design of all military aircraft and vehicles converted
into simulators and trainers met with Systems Safety Engineering
requirements of MIL-STD-882D for 14 Department of Defense (DoD) programs
worth over $130 million by developing a formal System Safety Program Plan
(SSPP) that managed environmental, safety, and health risks encountered in
the development, test, production, use, and disposal of DoD equipment. The
Systems Safety Program Plan consisted of identifying associated mishap
risks through a System/Subsystem hazard assessment of engineering designs
and converting the hazard assessment results into a quantifiable Hazard
Risk Assessment Matrix that calculated Hazard Severity & Hazard
Probability levels. Any identified risk were then eliminated or reduced to
an acceptable level through engineering design techniques and
administrative control of conditions and practices. Overall, this improved
operational readiness, reduced life cycle cost, and increased
environmental and occupational safety for all acquisition programs.
Overview of Engineering Job Duties:
. Ensured the logical and systematic conversion of Statement of Work (SOW)
requirements into total systems safety solutions that exceed safety
standards while acknowledging technical, schedule, and cost constraints.
. Conducted Hazard Analysis, System/Subsystem Hazard Analysis to identify
program risk factors associated with Electrical, Mechanical,
Radiological/RF, Chemical, Environmental, and Ergonomic design in
accordance with Systems Safety Engineering requirements of MIL-STD-882D
and MIL-STD-1472F.
. Documented potential safety hazards throughout the design phase and
recorded the development of administrative and engineering controls in a
formal System Safety Program Plan (SSPP).
. Evaluated site surveys to determine compatibility with electrical,
mechanical, and environmental constraints.
. Conducted pre-manufacturing reviews of system mechanical and electrical
drawings to verify safety and conformance with performance
specifications.
. Provided safety engineering guidance to program design engineers and
installation teams.
. Evaluated materials used in production to ensure that hazardous materials
were minimized or eliminated.
. Developed a Hazard Risk Assessment Matrix that quantified Hazard Severity
& Hazard Probability levels.
. Recommended and implemented proactive administrative & engineering
control measures in accordance with MIL-STD-882D that eliminated or
reduced associated mishap risks to an acceptable level.
. Incorporated Human Factors Engineering into the design of systems in
accordance with MIL-STD-1472F.
. Developed protocols and procedures for Operating and Maintenance (O&M)
manuals/Technical Publications that listed "Warnings" and "Cautions" and
provided instruction in the safe operation and maintenance of equipment.
. Detailed human interface guidelines for the use of PPE and Repair Parts
and Special Tools Lists (RPSTL).
. Prepared multimedia presentations and personally addressed customer
concerns during SSR, PDR, CDR, and TRR milestone reviews.
. Acted as a point of contact for customer support throughout product
design, manufacturing phase, installation, and end of lifecycle disposal.
. Verified that all Commercial, Off-the-Shelf (COTS) products used met with
UL/CE requirements.
. Organized System Safety Working Groups (SSWG) with program management,
engineering, manufacturing, logistics, and technical publications to
address mitigation of identified safety hazards.
. Verified safety requirements of Power Distribution and Monitoring Systems
(AC and DC).
. Developed Emergency Power-Off (EPO)/ E-Stop controls/procedures.
. Integrated simulator audio visual alarms and fire suppression systems
into facility alarm systems.
. Performed safety analyses and hazard assessment test of Hardware/Software
Integration (HSI).
. Produced program specific Safety Assessment Reports (SAR) of findings and
recommendations for control and correction of hazards in accordance with
DI-SAFT-80102.
. Developed the Corporate Environmental Health & Safety Program and
conducted employee training.
Key projects:
(Please see http://www.deicorp.net/Main.html for additional information on
the following 14 program):
1. Army Common Missile Warning System (CMWS) Maintenance Trainer -
Chinook Helicopter (CH-47)
2. Army Common Missile Warning System (CMWS) Maintenance Trainer
(CMT-A) AH-64D AN/AAR-57 - Apache Longbow Helicopter
3. Army Bradley M2 / M3 M2/M3 A2 ODS Maintenance Training System
4. Army (HIMARS) High Mobility Artillery Rocket System Maintenance
Trainer
5. Navy (LCAC) Landing Craft Air Cushion Service Life Extension
Program
6. Army UH-60M (BHAT) Black Hawk Avionics Trainer-M
7. Army Close Combat Tactical Trainer-Reconfigurable Vehicle
Simulator (CCTT-RVS) Real-time Tactical Combat Training (A DEI joint
venture with Lockheed Martin)
8. Army UH-60L (LGT) Landing Gear Trainer
9. Navy (T-44C) OFT AVU Operational Flight Trainer Avionics Upgrade
10. Army Abrams M1A2 SEP HOT System Enhancement Package, Hands On
Trainer
11. Navy (F-5N) IFT Instrument Flight Trainer
12. Army UH-60M (RBT) Rotor Break Trainer
13. Army CH-47F (CAT) Chinook Avionics Trainer
14. Army UH-60M (BHET) Black Hawk Electrical Trainer
OSHA COMPLIANCE AND TRAINING PROGRAMS
DEVELOPED AND CONDUCTED TRAINING FOR THE FOLLOWING SAFETY PROGRAMS:
. Lockout Tag Out (LOTO) compliance program addressing all the requirements
of 29 CFR 1910.147.
. Hazard Communication compliance addressing all of the requirements of 29
CFR 1910.1200.
. Powered Industrial Trucks compliance addressing all of the program
requirements of 29 CFR 1910.178.
. Hearing Conservation compliance addressing all of the requirements of 29
CFR 1910.95.
. Process Safety Management of Highly Hazardous Chemicals (PSM) compliance
program addressing all the requirements of 29 CFR 1910.119.
. Occupational Exposure to Hazardous Chemicals in Laboratories compliance
program addressing all the requirements of 29 CFR 1910.1450.
. Fire Prevention/Protection Plans addressing all of the requirements of 29
CFR 1910.39 and 1910.155-65.
. Design Safety For Electrical Systems compliance addressing all the
requirements of 29 CFR 1910.301-308.
. Emergency Action Plan addressing all the requirements of 29 CFR 1910.38.
. Exit Routes compliance program addressing all the requirements of 29 CFR
1910.37(a)(3) and NFPA 101.
. Bloodborne Pathogens compliance addressing all the requirements of 29 CFR
1910.130.
. Ergonomics compliance program addressing the requirements of OSHA's
Proposed Ergonomics Standard.
. Welding, Cutting, and Brazing compliance program addressing the
requirements of 29 CFR 1910.252-255.
. Respiratory Protection compliance program addressing all the requirements
of 29 CFR 1910.134.
. Permit Required Confined Space Entry program addressing all the
requirements of 29 CFR 1910.146.
. Fall Protection compliance program for the construction industry
addressing all of the requirements under 29 CFR 1926 Subpart M - Fall
Protection A, B, C, D, and E.
. Personal Protective Equipment (PPE) compliance program addressing the
requirements of 29 CFR 1910.132-138 with respect to Hearing Protection,
Eye and Face Protection, Hand/Foot/and Head Protection.
ADDITIONAL INFORMATION
LANGUAGES : Spanish
Spoken: Intermediate
Read: Intermediate
Verified by the University of South Florida Spanish Speaking placement
score 381 (WLE).
AFFILIATIONS:
Member -National Safety Management Society (NSMS)
Member - American Society of Safety Engineers- (ASSE)
Keyword Competencies:
Spanish speaking, Safety Engineer, OSHA 29 CFR 1010, 29 CFR 1926, EPA 40
CFR, NFPA 70, NFPA 101, NIOSH, ANSI, DOT 49 CFR, project safety
coordinator, accident prevention, industrial hygiene, job hazard
analysis, risk assessment, finite element analysis (FEA), emergency
planning, hazardous materials management, behavior based safety, PSM,
CERCLA, RCRA, ISO 14001, ISO 9001, best safety practices, Proposed
Ergonomics Standard 29 CFR 1910.900, ergonomic guidelines, Human Factors
engineering, user interface design, Rapid Upper Limb Assessment (RULA),
Rapid Entire Body Assessment (REBA), construction safety, industrial
safety, personal/environmental hazards, corporate compliance, research
and strategic planning, workers compensation, fire & emergency services,
citation abatement, variance petitions, OSHA (VPP), Systems Safety
Working Groups (SSWG), FMEA, COTS, Mean Time Between Failure (MTBF),
RPSTLS/Repair Parts and Special Tools Lists, Man-Print, MIL-STD-882, MIL-
STD1472, MIL-STD-1629, MIL-STD-785, MIL-STD-470, AR-385, NAVOSH
OPNAVINST 5100.23G, producing summary/administrative reports,
implementing administrative, & engineering controls. CMWS, CMT-A, CCTT
RVS, M1A2 SEP v2, M2A2 ODS HOT, UH-60M, UH-60L, SH-60/MH-60, SH-60F, CH-
47F, HIMARS, DI-SAFT-80102 SAR, Six-Sigma.
Contact this candidate